Awaiting product image

ECONEX

  1. Product Description

GTMAX ECONEX Fuel Economy Engine Oil Series is a range of advanced fully synthetic, low-viscosity engine oils developed for modern passenger cars requiring improved fuel efficiency without compromising engine protection.

The series is engineered to reduce internal friction and provide rapid oil circulation during cold starts. Its advanced additive technology helps protect critical engine components against wear, oxidation, sludge, piston deposits, and viscosity breakdown under demanding operating conditions.

ECONEX includes application-specific formulations covering ACEA C5 mid-SAPS, ACEA A5/B5 fuel-economy, and selected OEM-specific performance requirements. Each product is developed for a distinct engine technology and lubricant specification.

 

  1. Performance Standards & Applications
PRODUCT SAE GRADE PERFORMANCE LEVEL / REQUIREMENT APPLICATION
ECONEX FE 5W-20 5W-20 ACEA C5 Modern gasoline and diesel passenger-car engines requiring a mid-SAPS fuel-economy lubricant
ECONEX V 0W-20 0W-20 VCC RBS0-2AE Selected passenger-car engines requiring VCC RBS0-2AE performance
ECONEX LL 0W-20 0W-20 ACEA C5 Modern European gasoline and diesel engines requiring a mid-SAPS, long-life lubricant
ECONEX FE 5W-30 5W-30 ACEA A5/B5 Gasoline and light-duty diesel engines requiring a low-viscosity fuel-economy lubricant
       

 

 

 

 

  1. Key Benefits
  • Supports improved fuel economy in engines designed for low-viscosity lubricants
  • Stable, stay-in-grade performance throughout the specified service interval
  • Protection against engine wear, sludge, and piston deposits
  • Low-temperature pumpability according to the applicable SAE viscosity grade
  • After-treatment system compatibility for ACEA C5 products
  • Suitable for extended oil-drain intervals only where specified by the vehicle manufacturer

 

  1. Typical Technical Properties (Range Overview)
  FE 5W-20 V 0W-20 LL 0W-20 FE 5W-30
SAPS Category Mid SAPS Mid SAPS Mid SAPS Full SAPS
Kinematic Viscosity @ 100°C, mm2/s, ASTM D445 5,6 – 9.3 5,6 – 9.3 5,6 – 9.3 9.3–12.5
Viscosity Index, ASTM D2270, Min. 150 155 158 150
Pour Point, °C, ASTM D97, Max. -36 -39 -39 -36
Sulphated Ash, %, ASTM D874, Max. 0,8 0,8 0,8 1,0
Flash Point, COC, °C, ASTM D92, Min. 215 215 215 220
Density @ 15.6°C, g/ml, ASTM D4052 0.860 0.850 0.850 0.865
Kinematic Viscosity @ 40°C, mm2/s, ASTM D445 50.0 48.70 48,70 64.7
Noack evaporation loss, %, Max. 10 10 10 10
HTHS Viscosity at 150°C, mPa·s, ASTM D4683 ≥2,6 ≥2,6 ≥2,6 2,9 – 3,5

 

 

 

 

 

 

 

 

  1. Packaging Options

Available in: 1L, 4L, 5L, 20L pail, 55L drum, 200-208L barrel, 1000L IBC
Private label and bulk delivery options available on request.

  1. Storage & Handling

– Store between 0°C and 40°C in dry, well-ventilated conditions
– Avoid direct sunlight and ignition sources
– Shelf life: 5 years in original sealed packaging

  1. Health & Safety

Refer to the Material Safety Data Sheet (MSDS) for complete guidance on handling, disposal, and safety precautions.

Category:

Description

Disclaimer: The typical properties listed above represent average values and may vary within acceptable manufacturing tolerances. This information does not constitute a specification.

Related products