Description
Note: The information provided is based on current knowledge and experience. It does not constitute a legally binding assurance of specific properties.
ENGINE FLUSH TREATMENT
1.Product Description
ENGINE FLUSH TREATMENT is a high-performance engine flush additive designed to clean and remove sludge, varnish, and deposits from inside the engine. It helps restore engine cleanliness and ensures maximum performance of fresh oil after oil change.
2.Advantages
- Effectively dissolves sludge, varnish, and deposits inside the engine
- Frees sticking piston rings and hydraulic lifters
- Improves lubrication efficiency and reduces wear
- Prepares engine for optimum performance with fresh oil
- Safe for seals, gaskets, and catalytic converters
3.Applications
- Suitable for all gasoline and diesel engines with or without turbochargers
- Compatible with mineral, semi-synthetic, and fully synthetic engine oils
- Recommended for use before every oil change, especially in engines with long service intervals or unknown oil history
4.Typical Technical Properties (Range Overview)
| Property | Typical Value |
| Appearance | Clear amber liquid |
| Density @15 °C | 0.80 – 0.86 g/cm³ |
| Flash Point (PMCC) | > 60 °C |
| Solubility | Completely soluble in fuel |
5. Dosage & Treat Rate
Add one bottle (300 ml) to engine oil before oil change. Idle the engine for 10–15 minutes, then drain the oil and replace with fresh oil and filter.
6.Packaging Options
Available in: 300 ml
Private label and bulk delivery options available on request.
7.Storage & Handling
– Store between 0°C and 40°C in dry, well-ventilated conditions
– Avoid direct sunlight and ignition sources
– Shelf life: 2 years in original sealed packaging
8.Health & Safety
Refer to the Material Safety Data Sheet (MSDS) for complete guidance on handling, disposal, and safety precautions.