Description
Note: The information provided is based on current knowledge and experience. It does not constitute a legally binding assurance of specific properties
CUTTING OIL
1.Product Description
GTMAX CUTTING OIL is a high-quality neat cutting oil formulated to provide excellent lubrication and cooling during metal cutting operations. It is suitable for medium-hard metals and applications such as drilling, tapping, threading, and heavy-duty machining. The product ensures improved surface finish, longer tool life, and enhanced operational safety due to its high flash point.
2.Advantages
- Superior lubrication for medium-hard metals
- Improved surface finish and extended tool life
- Excellent chip removal and cooling properties
- High flash point for safe operation
- Effective rust and corrosion protection
- Ready-to-use neat cutting oil (no dilution required)
3.Applications
- Drilling, tapping, threading and broaching operations
- General machining of medium-hard steels and alloys
- Metal cutting applications requiring neat oils
4.Typical Technical Properties
| Property | Typical Value | Test Method |
| Kinematic Viscosity @ 40°C, mm²/s | 15 – 25 | ASTM D445 |
| Density @ 15°C, g/ml | 0.86 – 0.89 | ASTM D4052 |
| Flash Point, COC, °C | Max. 200 | ASTM D92 |
| Appearance | Clear Yellow Fluid | Visual |
| Water Solubility | Insoluble | Visual |
Disclaimer: The typical properties listed above represent average values and may vary within acceptable manufacturing tolerances. This information does not constitute a specification.
5.Packaging Options
Available in: 20L pail, 55L drum, 200-208L barrel, 1000L IBC
Private label and bulk delivery options available on request.
6.Storage & Handling
- Store between 0°C and 40°C in a dry, well-ventilated place
- Avoid direct sunlight and moisture
- Shelf life: 2 years in original sealed packaging
7.Health & Safety
Refer to the Material Safety Data Sheet (MSDS) for complete guidance on handling, disposal, and safety precautions.